弧形海岸裂流的数值模拟研究   总被引：3，自引：0，他引：3  

汪鸿  朱首贤  李训强  张文静  聂屿 《海洋学报(英文版)》2018,37(3):21-30

弧形海岸波浪产生的裂流严重危害人类活动，但是目前对其特征缺乏充分认识。本文对Haller物理模型实验和三亚大东海的数值模拟表明FUNWAVE模式具有较好的裂流模拟能力。基于该模式进行了多种弧形海岸条件的裂流数值模拟，给出裂流的一些特征：（1）海岸弯曲度增大，裂流增强；（2）海岸坡度对裂流有比较大的影响，太陡或太平缓的海岸不利于形成裂流；（3）海岸尺寸减小，裂流减弱；（4）波高和波周期增大，裂流增强，但是对于某些海岸而言，0.4m波高可能就存在危害比较大的裂流。  相似文献   

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis     

Ramin Pakzad  Shanyong Wang  Scott W. Sloan 《国际地质力学数值与分析法杂志》2020,44(10):1472-1494

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.  相似文献   

渤、黄海生态环境模拟的参数敏感度空间差异分析     

罗辰奕  聂红涛  张海彦 《海洋学报》2019,41(8):85-96

随着海洋生态系统模型的发展，生态变量增多，众多生物过程参数量值的确定成为制约生态环境模拟的瓶颈问题，生态系统结构区域性要求模型中的生态参数具有区域差异。为探究不同海区的关键参数及参数敏感度的空间差异，本研究在渤、黄海建立了ROMS-CoSiNE物理–生物耦合的高分辨率生态系统模型，并对13种生态参数的敏感度空间分布进行分析。结果表明:南黄海中部与渤海及近岸海域的敏感度差异较大。渤海敏感度最大的参数为决定光合速率的浮游植物P-I曲线初始斜率，其次为浮游动物捕食半饱和常数和浮游动物最大捕食率。而南黄海中部敏感度最大的参数为浮游动物最大捕食率，其次为浮游植物死亡率和浮游植物P-I曲线初始斜率。结合敏感度分布及浮游植物生物量收支得出，渤海水体透明度较南黄海偏低、浮游植物生长光限制较强，是引起浮游植物P-I曲线初始斜率敏感度在渤海高于黄海的主要原因。浮游动物最大捕食率及浮游植物死亡率的敏感度空间差异，受渤、黄海浮游植物生物量差异的影响，与生态系统中的高度非线性特征有关。  相似文献   

Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials          下载免费PDF全文

Chao Jiang  Gao‐Feng Zhao 《国际地质力学数值与分析法杂志》2018,42(4):674-693

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.  相似文献   

湿地水文过程与植被响应研究进展与案例分析     

徐力刚  赖锡军  万荣荣  王晓龙  李相虎 《地理科学进展》2019,38(8):1171-1181

生态水文学是20世纪90年代兴起的一门研究生态过程和生态格局水文机制的新学科。湖泊湿地作为中国5大类天然湿地类型之一,湖泊湿地生态水文学的研究业已成为生态水文学的研究的一个重要对象和分支,其核心在于研究湖泊湿地生态系统中多时空尺度的水文与生物格局、过程的耦合特征及其相互作用。论文首先概述了湖泊湿地生态水文学的研究进展,包括其基本理论,内涵、外延及其主要研究内容;凝练了湖泊湿地生态水文学研究的方法体系、思路及框架;针对目前湖泊湿地生态水文学研究中存在的问题及薄弱环节,提出了湖泊湿地生态水文学未来研究的发展趋势和亟需加强研究的重点方向。在此基础上,以长江中游的典型通江湖泊湿地——鄱阳湖湿地为例,通过开展的湖泊湿地生态水文过程与模拟研究的典型案例,阐述了鄱阳湖湖泊湿地生态水文过程的变化及其植被响应研究的最新进展和研究成果。论文对于构建涵盖湖泊湿地水资源、湖泊湿地生态景观格局与流域管理、湖泊湿地生物多样性保育以及湿地资源可持续利用与生态管理等方向在内的战略研究体系,完善湿地生态水文研究与流域生态与管理的技术支撑体系具有重要的指导意义和实践价值。  相似文献   

非等间距GM(1,1)模型的总体最小二乘算法及其病态问题     

陶武勇  花向红  鲁铁定  陈西江  张伟 《大地测量与地球动力学》2019,39(1):45-50

在非等间距GM(1,1)模型中，系数矩阵中有无误差的常数项和有误差的随机项，并且系数矩阵与观测向量误差同源，即系数矩阵与观测向量中有相同的元素存在，这些相同元素应该有相同的改正数，为此本文推导了一种适合非等间距GM(1,1)模型求解的总体最小二乘算法。同时，考虑到非等间距GM(1,1)模型中存在病态问题时影响总体最小二乘计算结果的稳定性，提出对系数矩阵常数列乘以某一常数的方法，以改善病态问题。  相似文献   

鄂尔多斯地块周缘垂直形变场负位错反演与应变积累研究     

张希  刘立炜  郝明  白卓立 《大地测量与地球动力学》2019,39(6):551-556

利用鄂尔多斯地块及其周缘1970～2014年的垂直形变速率场资料，借助负位错反演研究该区域长期应变积累。结果表明，地块东北缘山西断陷带中北段年均能量积累增量、剪应力强度都较高，西南缘六盘山断裂与渭河断裂西段次之；山西断陷带中南段至晋陕交界处年均剪应力强度较高且显示一定程度的能量积累；西秦岭构造区尤其西秦岭北缘断裂西段、晋冀蒙交界区也反映一定程度的能量积累特性。  相似文献   

Assessment of alternative adsorption models and global sensitivity analysis to characterize hexavalent chromium loss from soil to surface runoff          下载免费PDF全文

Chuan‐An Xia  Juxiu Tong  Bill X. Hu  Xiujie Wu  Alberto Guadagnini 《水文研究》2018,32(20):3140-3157

We investigate our ability to assess transfer of hexavalent chromium, Cr(VI), from the soil to surface runoff by considering the effect of coupling diverse adsorption models with a two‐layer solute transfer model. Our analyses are grounded on a set of two experiments associated with soils characterized by diverse particle size distributions. Our study is motivated by the observation that Cr(VI) is receiving much attention for the assessment of environmental risks due to its high solubility, mobility, and toxicological significance. Adsorption of Cr(VI) is considered to be at equilibrium in the mixing layer under our experimental conditions. Four adsorption models, that is, the Langmuir, Freundlich, Temkin, and linear models, constitute our set of alternative (competing) mathematical formulations. Experimental results reveal that the soil samples characterized by the finest grain sizes are associated with the highest release of Cr(VI) to runoff. We compare the relative abilities of the four models to interpret experimental results through maximum likelihood model calibration and four model identification criteria (i.e., the Akaike information criteria [AIC and AIC_C] and the Bayesian and Kashyap information criteria). Our study results enable us to rank the tested models on the basis of a set of posterior weights assigned to each of them. A classical variance‐based global sensitivity analysis is then performed to assess the relative importance of the uncertain parameters associated with each of the models considered, within subregions of the parameter space. In this context, the modelling strategy resulting from coupling the Langmuir isotherm with a two‐layer solute transfer model is then evaluated as the most skilful for the overall interpretation of both sets of experiments. Our results document that (a) the depth of the mixing layer is the most influential factor for all models tested, with the exception of the Freundlich isotherm, and (b) the total sensitivity of the adsorption parameters varies in time, with a trend to increase as time progresses for all of the models. These results suggest that adsorption has a significant effect on the uncertainty associated with the release of Cr(VI) from the soil to the surface runoff component.  相似文献   

Predicting quantiles of water quality from catchment characteristics     

Danlu Guo  Shuci Liu  Dhananjay Singh  Andrew W. Western 《水文研究》2021,35(1):e13996

Water quality is often highly variable both in space and time, which poses challenges for modelling the more extreme concentrations. This study developed an alternative approach to predicting water quality quantiles at individual locations. We focused on river water quality data that were collected over 25 years, at 102 catchments across the State of Victoria, Australia. We analysed and modelled spatial patterns of the 10th, 25th, 50th, 75th and 90th percentiles of the concentrations of sediments, nutrients and salt, with six common constituents: total suspended solids (TSS), total phosphorus (TP), filterable reactive phosphorus (FRP), total Kjeldahl nitrogen (TKN), nitrate-nitrite (NO_x), and electrical conductivity (EC). To predict the spatial variation of each quantile for each constituent, we developed statistical regression models and exhaustively searched through 50 catchment characteristics to identify the best set of predictors for that quantile. The models predict the spatial variation in individual quantiles of TSS, TKN and EC well (66%–96% spatial variation explained), while those for TP, FRP and NO_x have lower performance (37%–73% spatial variation explained). The most common factors that influence the spatial variations of the different constituents and quantiles are: annual temperature, percentage of cropping land area in catchment and channel slope. The statistical models developed can be used to predict how low- and high-concentration quantiles change with landscape characteristics, and thus provide a useful tool for catchment managers to inform planning and policy making with changing climate and land use conditions.  相似文献   

基于F-范数的不确定性平差模型的解算方法     

鲁铁定  朱国红 《大地测量与地球动力学》2018,38(6):557-561

为提高基于F-范数的不确定性平差模型的解算效率，给出直接迭代算法进行参数估计。该算法无需SVD，解算过程简单且易于编程计算，同时给出迭代不收敛时的SVD-解方程算法。二元线性拟合及沉降观测AR模型的算例结果表明，这2种算法正确可行，与SVD-迭代算法具有等价性。当迭代收敛时，宜使用直接迭代算法，收敛速度更快，解算效率更高；当迭代不收敛时，可釆用SVD-解方程算法。  相似文献